The Benefits of a Central AC Unit

Central air conditioning systems make use of ductwork to distribute cooled air in every room. An air handler that has a filter that captures particulates regulates the flow of air.

The unit is usually placed in a small enclosure that is outside the home. The unit’s quiet operation will increase your comfort, as it will keep the constant hum and whirrr of window AC units from disrupting your indoor peace.

Energy Efficiency

Central air conditioners consume more energy than wall-mounted units, modern systems are more efficient than the ones used in the past. The refrigerant that depletes the ozone R22 was phased out in 2006 and was replaced by an eco-friendly product known as 410A and manufacturers are constantly experimenting with new technologies to help their systems consume less energy.

Contrary to window AC units, which are specifically designed to cool the room they’re mounted in, central AC systems can distribute cool air throughout your home with air ducts. The cooling process begins when your thermostat signals that the air handler must start cycling. The air handler pulls warm air from your living areas and then passes it over the evaporator coil which is filled with cool refrigerant. The heat in the air causes the refrigerant to absorb energy and transform into gas. The compressor then raises the temperature and pressure of the refrigerant. As it pumps it, it carries the heat out of the evaporator coil back into the house, where it’s cooled and distributed through your ductwork again.

Central AC systems are the most efficient when it comes to controlling temperature in large spaces. They can consistently cool rooms that are farther away than one wall AC unit can, and they offer better energy efficiency in general.

You may find that depending on how well sealed and insulated your home is and the layout, a mini-split conditioner will save you more energy than central air cooling. Mini-splits are not the same as central ACs, but they are more efficient, as they don’t use the ductwork. Ductwork leaks can cause the system overwork to cool your home to the desired temperature. If you’re interested in learning more about energy-efficient options for cooling your home, talk with an HVAC professional at your local Dallas heating and air conditioning business. They can help you find the best solution for your requirements.

Convenience

In addition to comfort and energy efficiency central air conditioning systems also provide lots of convenience. These systems can cool the entire business or home with one unit and don’t require vents like window units. They are also fitted with high-quality filters to help keep allergens and pollutants out of the air. This is particularly helpful for those who suffer from respiratory or allergies.

Central AC is a popular cooling system, and for good reason. This is a great option for homes with ductwork and need an effective cooling solution. These systems can cool each room with just one vent. They can also be used in conjunction with thermostats that are zoned for home use, which allow you to manage the cooling needs of different rooms in your house.

This is the most commonly used kind of AC system that operates similarly as a furnace. Central air conditioners have an outdoor unit that blasts warm air, and a smaller indoor unit that pulls cold or hot air from the ductwork. The refrigerant is pumped through lines from the air handler, and it absorbs heat in the process. The cool air is pushed back to the air handler in the home and circulated via the ductwork to other rooms.

Central air conditioning systems can also reduce humidity. This is especially crucial in our humid climate. The air handler can remove excess moisture, and then release it to the outside, which helps to prevent the growth of mildew and mold in your ductwork.

It’s time to upgrade your cooling system if older than 15 years. A new, top-quality AC system will allow you to save money on energy bills as well as protect the integrity of your ductwork. Contact Chancey & Reynolds to learn more about our cooling solutions. We can assist you in selecting the right air conditioner to meet your budget and needs.

Maintenance

Your air conditioner, like any other major appliance requires regular maintenance to ensure it runs smoothly. Some routine maintenance tasks can be performed by the homeowner, however, other tasks should be handled by certified experts. Signing an agreement for maintenance is the best way to stay on top of AC problems. These agreements typically come with discounts on repairs and other perks, such as priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty will restrict air flow, reduce the efficiency of the system and increase energy costs. To prevent the accumulation of dirt and debris, turn off the power to your compressor unit prior to you begin cleaning. Then, using the help of a garden hose and rag, gently clean the coil fins and blades of your fan to remove dirt leaves, twigs, and twigs. After washing, use a paper towel and sanitation spray to wipe and sanitize the fan blades. You should also straighten any bent fins that may have been caused by wind, or other weather conditions.

Line Sets

If your central air conditioner is more than 10 years old, it is recommended to get a professional to examine the line sets, the copper tubes that connect the indoor air conditioning evaporator coil with the outdoor compressor and condenser unit. The lines are a conduit for refrigerant and any cracks or rust may cause leaks that can lead to low cooling and costly costs for utility.

Air Filter

To improve the performance of your AC system, make sure you change your air filter regularly. The frequency of changing your air filter will depend on how often you run the AC and how many pets are living in your home and how much dust gets accumulated. A typical air filter will last about two weeks to one month during the cooling season.

Condensate Drain Line

If the drain line for your condensation becomes clogged by algae, mold, or bugs, the accumulated water on the evaporator coil won’t be able to flush away. This can result in a flood-prone home, water damage, and the development of mildew and mold. The float switch on your indoor coil will shut down the system if it detects a blockage in the drain line.